EcoRay 112D (Dual Cord) High Powered LED Lighting System  

********* New 2011 Updated Version ***********

New: Wider Angle Lens, wider coverage area

New: White LED color temperature of 12,000 K-16000K

New: Quiter Fans

The intent of designing and building this light is to offer an affordable alternative for LED lighting that will allow hobbyist see a return on their investment measured in months instead of years. Ecoray has custom features designed specifically for Naxandra including high power LED, all aluminum casing, light boards and fan. The spacing and angle of the lenses was altered to best light up standard aquarium sizes for most reef denizens. By engineering certain components of the system the overall lighting area was increased while using the same wattage. Also the spotlight affect has been reduced to replicate a more natural spread of light, while still inducing glimmer lines.

New  ECORAY 112D - Dual Cords
NEW wider angle lense, wider coverage
NEW quieter fans
600+ PAR at 24" from center
56 White High Power 1 Watt LED, 56 Blue Actinic High Power 1 Watt LED
Dual Cords, one cord for White LED, one cord for Blue LED
All Aluminum Housing : 19.6" x 11.3" x 2.4"
Dual Cooling Fans
Recommended coverage (150+ PAR min) at 24" from light surface : 26" x 18" (over 3 sq-ft)
For larger coverage, place it higher above water level
Designed for deeper reef aquariums (2-4 ft depth)

Brighter than Metal Halide, 600+ PAR in center at 24"PAR Value at center is more than double that of 250W Metal Halide HQI. However, the light spread is narrower. For best results, we recommend one Ecoray 112D for approximately 26" x 18" area. Do not be confused with many low power LED units in the market claiming large coverage area for similar wattage, these units generally produce 40-50 PAR at 24" (on tenth the PAR of Ecoray 112). These low power LED units are more suitable as T-5 replacements.

PAR Demonostration link: http://ecorayled.com/Ecoray60/PAR_Demonstration.html

Up to 100 lumens per wattHigh Power 1 Watt LED produced up to 100 lumers per watt. We have intentionally selected the High Power 1 Watt over the 3 watts LED as they are much more efficient and save more energy.

Generates very little heat. You can touch the glass underneath while Ecoray 112D is operating. Try doing that with Metal Halide.

Save 50% energy while getting higher intensityYou can expect to save at least 50% energy over 250 W Metal Halide setups while getting higher intensity. Generally, replace one 250 W Metal halide with two Ecoray 60.

Eliminate yearly Metal Halide bulb replacement + cooling costs Metal Halide requires bulb replacements every 9 to 12 months at a cost of $60 to $80 per bulb. LED has a life expectancy of up to 50,000 hours. Additionally, due to the intense heat generated by Metal Halide units, a separate cooling system is usually required that consumes lots of energy.

Compact, Light Weight and Simple Dual 12 ft electric cords comes out from the unit (see dimensions below). There is no separate and heavy ballast box. There is no on/off switch. Simply connect it to your own timer, then to the electrical outlet and enjoy.

Highly Competitive pricingOur goal is not only to provide you with the best value in High Power LED lighting but also to provide you with a better value proposition than Metal Halide lighting.

Specifications:

56 White High Power 1 Watt LED, color temperature 12000 K - 16000 K
56 Blue Actinic High Power 1 Watt LED, Wave Length 450-470 nm
62 W, 120 V - 240V, 12 ft electrical cords
Built-in fans
All Aluminum Housing 19.6" x 11.3" x 2.4", ~15 lbs
Supporting L Brackets (not shown in photos) and hanging wire included

For Best Results, use one light to cover 26" x 18" area.

1 Year Limited Manufacturer Warranty
http://ecorayled.com/Ecoray60/Warranty.html

PAR Demonstration Video Link
http://www.ecorayled.com/Ecoray60/PAR_Demonstration.html